|
 |
Vigibat 2810 GTB
delivered with 1 or 2 presence detectors and 1 temperature sensor
Can be connected to all types of GTB with
interface for providing heating periods for
comfort, reduced heating and
anti-freeze modes
As an option it can be connected to Optibus or Optiwatt
Dimensions:
length 173 mm,
width 136 mm,
depth 230 mm
Weight: 3.200 kg
|
-
Presence detection via one or more triple technology detectors:
temperature, infra-red and microwave. Other detectors can be added at rate of one for every 250 m²
(approximately).
-
Control varies with the internal temperature as measured by a sensor in the controlled zone
-
Unplanned heat gains (from sun, number of occupants, number of operational machines...) are taken into account
-
On the front of the unit, the program can be overridden manually for a period of time, after which the program automatically
resumes.
-
Heating mode status is
displayed: comfort heating period in red and economy period in
yellow.
|
-
Heating output fed to 5 Ampere
relay.
(only on Vigibat 2800 unit).
-
An auxiliary output, which is controlled by the presence
detector, controls the lighting and ventilation systems
-
It also has a remote input for connection to a telephone line or a central control system to set the
anti-freeze
temperature.
-
There is also a loop circuit which together with a thermostat can be used to switch off the system when doors or windows are opened and also to switch to the
anti-freeze temperature setting (set by the manager) if the public exits are
opened.
-
Can be used with all types of heating
(gas, oil)
-
Cabling connections are very simple; only 2 wires for the sensor and 4 wires for the presence
detector.
|
